Antec 600 & 902, Modified for 2010 PaxEast

AntecInc

Hello All!

Antec has asked MNPCTech to customize a Six Hundred and Nine Hundred Two gaming case, which will be auctioned off after the PAX East event! We’ll announce where the proceeds are going, at the time of the auction, but to stir up some excitement before the event, follow the latest case mod updates here:

http://www.themodbrothers.com/viewtopic.php?f=14&t=2062.

Be sure to swing by the Antec booth and check out the cases in-person! And, come by to participate in the raffle and daily games, for a chance to win some awesome gear!

Antec
Booth #927
www.antec.com

The_Reflection

Protip: if it isn't for child's play, probably don't advertise it for PAX.

Rdr

Sounds cool.

Child's Play is a logical choice but a lot of people need help too.

Mnpctech

We are currently modding Antec's 600 & 902 cases for Antec's booth at Pax East.

Closer examination of Antec's newest gaming case before it went into Mnpctech's shop
Antec Six Hundred case review

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_review_casemodblog.com1.jpg


New top grill design concept..

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech1.jpg

Top grill design concept..image 2 finished

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech2.jpg

Left side side panel cover design for Antec 902, this will be for 2nd case Antec is auctioning off.

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech4.jpg

We finished the new vented top piece to replace the Antec 600's "moonroof"

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_review_casemodblog.com3c.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech5.jpg

goodbye Plexi window...hehe

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9a.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9b.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9c.jpg

Updated 2/26: Top plate for the 902, the recessed portions will be painted Black

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9d.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9e.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9f.jpg

Here is the 600's bezel after some alterations...

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_mnpctech1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_mnpctech2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_mnpctech3.jpg

Custom 3x 120mm front intake for the 600.

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9g.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9h.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9i.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9j.jpg

Top grill for Antec 902's top cooling fan

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9o.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9p.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9q.jpg

I'll be installing 3 of these

120mm Turbine Fans ...2000 rpm, 79.4 cfm @ 30 dBA

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech3.jpg

Fitting the new triple turbine intake onto the Antec 600.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_intake_mnpctech.com.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_intake_mnpctech.com1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_intake_mnpctech.com2.jpg

Moe Fwacky

When making long posts with lots of images, please use spoiler tags and/or link the images instead of posting them inline.

Also link all images over 500KB

Thanks

Mnpctech

The Antec 600 case will be painted Dark Grey Steel Metallic. This color was the result of mixing Silver Metallic with Gloss Black and Dark Blue. We use House of Kolor and PPG brand paints. The case will have an automotive grade paint finish for maximum durability and shine!

Here is the photos of mixing the color test spray out.

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_HAF_pc_casemod9z9b1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_HAF_pc_casemod9z9c.jpg

Mnpctech

Here is the new top plate we made for the Antec 902 case. The recessed portions will be painted Black

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9d.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9e.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_concept_top_mnpctech9f.jpg

DUCOM

Why wouldn't they ask you to modify the Antec 1200 case? Instead they ask you to modify the 600 and 900?

Mnpctech

I don't know, but I'm happy to mod whatever model they send me. The billet intake resides inside the stock bezel. I've drilled and tapped the sides of the intake for 8/32 size socket head machine screws.

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_tap6.jpg

Rdr

Pretty awesome project and so much info/pictures to accompany it. Nice job!

I hate to be the one but its been a few days...You have it spelled as "Sponser" when it should be "Sponsor"

Mnpctech

Thank you for commenting and noting the typo Rdr!

Please stay tuned for more updates

Mnpctech

Here is the paint I've selected for the Antec 902. It's "Apple Red Candy" by House of Kolor

http://www.mnpctech.3dpixelnet.com/picture_library/hc9z9z1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/hc9z9z2.jpg

LTAcosta

So wait, is this going to be PAX themed in any way?

Mnpctech

If I have time, any Suggestions?

Ok, time for the 902 to grab the spotlight for awhile. This is House Of Kolor Candy Apple Red.

The color sample book of the Paint Gods, HOUSE OF KOLOR

http://www.mnpctech.3dpixelnet.com/picture_library/hc9z9s.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/hc9z9t.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/hc9z9u.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com2a.jpg

Mnpctech

The top panel of the Antec 902, after clearcoating

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com4.jpg

Hootorama

Looking good!

o the afermath

too many fans

Mnpctech

Thanks for the comments :^:

Mnpctech

The Antec 902 bezel frame after clearcoating

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec902_casemod_paint_mnpctech.com6.jpg

Ahkhira

WOW!!! Figures that my gaming rig just fried too!

Mnpctech

Ahkhira wrote: »

WOW!!! Figures that my gaming rig just fried too!

Sorry to hear this. May I ask what case you are using? just curious

Ahkhira

Mnpctech wrote: »

Sorry to hear this. May I ask what case you are using? just curious

I had an ancient Ailenware rig. At 5+ years old, it finally suffered a thermal breakdown.

Mnpctech

Thats a bummer! Here is Photos of the Antec 600 panels and front bezel a few hours after clear coating. I really love this color. It will be great contrast to the machined aluminum features we created!

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_paint6.jpg

Mnpctech

Will be doing the assembly of the cases Monday morning, will post photos then.

Mnpctech

Assembling the bezel for the 600 this morning.

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec600_casemod_120mm_turbine_mnpctech7.jpg

Mnpctech

Here is the 600 before being shipped to Antec

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_case_pc_mod.jpg

Mnpctech

The vented side panel was cnc milled from 3/16" thick billet aluminum. "Antec - Believe it" logo is engraved in the surface. 360 Turbine style front intake was made from 3/4" thick aluminum.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_case_pc_mod2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_case_pc_mod7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_600_case_pc_mod8.jpg

AntecInc

Antec will be at PAX East this year and wants to know what you think about PC building.

We are conducting a series of open table discussions with the fine folks who will be attending the show.

If you are an avid builder, a new builder, or a systems integrator please contact us at Tchung@antec.com and let us know that you’d like to join our discussion.

Please include your full name, e-mail and contact information, your interest level in PC building, current PC set up, the days/times you will be attending the show, and any other information to let us get to know you better.

Slots are limited so don’t wait, contact us now.

Thank you and we look forward to seeing you at PAX- East!

Malfeis

I'd definitely be interested, but what time(s) would these discussions be held? I want to make sure I work it into my schedule.

Mnpctech

Ok, Here is the final details of the Antec Nine Hundred Two case.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod.jpg
50s era hot rods were on my mind when I brainstormed the design. That is why I chose the Candy Apple Red paint.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod2.jpg
The top "Starfire" grill was made from 3/16" thick 6061 aluminum.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod3.jpg

We applied 3 full coats of HOK Candy Apple Red paint, followed by 4 separate clear coats. This is followed by ample proper dry times and then the finishing touches of buffing with heavy cut compound followed by a final buff with swirl remover.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod4.jpg
The vented side panel was cnc milled from 3/16" thick billet aluminum.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod8.jpg
The top custom panel is 1" thick 6061 aluminum.

http://www.mnpctech.3dpixelnet.com/picture_library/antec_902_case_pc_mod9.jpg
"Antec - Believe it" logo is engraved in the surface.

Mnpctech

The Antec 600 is posted on Case Mod Blog

http://www.casemodblog.com/?p=3832

Mnpctech

The Antec Six Hundred "BULLET" and Antec 902 "STARFIRE" cases are being Auctioned off by Antec. All proceeds generated by the online auction will go to benefit AmeriCares, a nonprofit global health and disaster relief organization, dedicated to restoring health and saving lives by delivering donated medicines, medical supplies and humanitarian aid to people in need

Antec "BULLET" by Mnpctech

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260581614343&ssPageName=STRK:MESCX:IT

Antec STARFIRE by Mnpctech

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260581621616&ssPageName=STRK:MESCX:IT.