The new forums will be named Coin Return (based on the most recent vote)! You can check on the status and timeline of the transition to the new forums here.
The Guiding Principles and New Rules document is now in effect.
Alright well this is my first time building a computer (whoo) I'm pretty excited for the experience and have a decent amount of knowledge on how to do it. Either way though are there any sites I should read just to get an even better Idea of what I'm getting into? Also I could use suggestions for the parts to buy mainly going to be used for Gaming MMO's RTS's and the like. Price isn't really an object since I can get the parts I need wholesale.
Ziac45 on
0
Posts
Mr_Rose83 Blue Ridge Protects the HolyRegistered Userregular
edited June 2007
There are many many places on the intertron which can tell you what the latest and greatest hardware is doing; I suggest you check out a few of those like www.tomshardware.com and see where the state of the art is at (I'm not going to make a recommendation here because it will inevitably be out of date by the time I hit submit).
Other than that, you will need an open space with lots of light to assemble the thing in, as well as enough room that you can get access to al six sides of the case without too much contortion. Make sure you have all the bits to hand before you start and please actually read the manuals that come with the bits first. Test-fitting is your friend too.
Go here. Say "I want to spend x number of dollars, I want to use it for y and z - what should I get." The thread dropped off the front page - needs to be a sticky again!
Tom's Hardware is very good as they have DIY articles on the low, mid and high end price ranges. They also test most components in the PC and have accompanying charts for easy comparisons. Tom's will likely be your 'one stop shop' for information.
Use wikipedia and the manufacturer sites for any technical information you may need. As a general rule of thumb, I never go cheap when buying parts, so I stick the name brand supplies (micron, eVGA, XFX, Maxtor, Seagate, Asus, Gigabyte, etc...). Generic parts will only land you in trouble. Although the afore-mentioned companies have other products, they usually specialize in one.
If you want to find information on current pricing, I'd check out these sites:
I don't think I could take a class without sparring. That would be like a class without techniques. Sparring has value not only as an important (necessary) step in applying your techniques to fighting, but also because it provides a rush and feeling of elation, confidence, and joyful exhaustion that can only be matched by ... oh shit, I am describing sex again. Sorry everyone. - Epicurus
Posts
Other than that, you will need an open space with lots of light to assemble the thing in, as well as enough room that you can get access to al six sides of the case without too much contortion. Make sure you have all the bits to hand before you start and please actually read the manuals that come with the bits first. Test-fitting is your friend too.
Nintendo Network ID: AzraelRose
DropBox invite link - get 500MB extra free.
As for parts, at least a Gig of RAM, if not two. My knowledge on Motherboards and CPU's and such is out of date though.
After reading that, i was able to build THIS:
61" 1080p Samsung DLP(you're damn right I run EVERYTHING in 1920x1080)
My baby...
as guarded by Optimus and Unicron
Her inards
RAM glowing with 3vil light
Specs:
Case - GIGABYTE 3D Aurora 570 GZ-FA1CA-ASB Black 1.0 mm Aluminum body ATX Full Tower
MOBO - ASUS P5W DH DELUXE/WIFI-AP LGA 775 Intel 975X ATX Intel
Processor - Intel C2D E6600 2.4GHz (OC'd to 3.6GHz)
RAM - CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 TWIN2X2048-6400PRO(with activity LED's)
Graphics Card - Sapphire ATI Radeon 1900XTX 512MB GDDR3(hooked to TV via HDMI)
Soundcard - Creative SOUND BLASTER X-Fi Fatal1ty FPS 7.1
3 320GB Seagate HD's
Power-supply - Antec NeoPower NeoHE 550 ATX12V 550W
Keyboard - Logitech G-15
Use wikipedia and the manufacturer sites for any technical information you may need. As a general rule of thumb, I never go cheap when buying parts, so I stick the name brand supplies (micron, eVGA, XFX, Maxtor, Seagate, Asus, Gigabyte, etc...). Generic parts will only land you in trouble. Although the afore-mentioned companies have other products, they usually specialize in one.
If you want to find information on current pricing, I'd check out these sites:
www.pricewatch.com
www.newegg.com
www.mwave.com
tsmvengy is right too. Ask questions! =D