As was foretold, we've added advertisements to the forums! If you have questions, or if you encounter any bugs, please visit this thread: https://forums.penny-arcade.com/discussion/240191/forum-advertisement-faq-and-reports-thread/

The newer action figures (and other toys) thread (NSF56k)

18081838586100

Posts

  • Undead ScottsmanUndead Scottsman Registered User regular
    Hey, how do you guys go about cleaning dust off your toys? Sometimes I'll run a swiffer around them, but I feel like that doesn't get all the nooks and crannies.

  • HefflingHeffling No Pic EverRegistered User regular
    I use a soft bristle pastry brush. I think it's boar hair.

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    I read some people use those makeup brushes. Honestly I don't dust much and when I do it is usually with a Swiffer thing and my pants legs.

    oosik_betsuni.png
    Steam: betsuni7
  • Local H JayLocal H Jay Registered User regular
    Does compressed air work well? My stuff is getting dusty as well

  • WingedWeaselWingedWeasel Registered User regular
    Can't collect dust if you play with them all the time

  • HefflingHeffling No Pic EverRegistered User regular
    Does compressed air work well? My stuff is getting dusty as well

    In my experience, no. It'll blow off some of the dust, but it tends to go everywhere and it doesn't get enough of it. I have cleaned a lot of lego models, gunpla, and transformers with an old soft pastry brush from our kitchen.

    I clean my various models twice a year, because even though we live in a wet climate (Houston), our dogs tend to bring in a lot of stuff from outside.

  • Undead ScottsmanUndead Scottsman Registered User regular
    dKNY5Ag.jpg
    Yesssssssss.....


    Have a terrible photo (Shouldn't have gone for the low angle)
    2oWduvR.jpg

    Thoughts

    -Mothra is TINY, which is a little galling given she's the same price as the other two. (Originally she was going to come with a Larva figurine, but Toho appparently nixed it). She's so small I was scared to try and get her out of the plastic she was wedged in. Articulation isn't as good as I'd like (wings don't rotate or go back/foward) but the figure is so small I'm not surprised. Otherwise she's pretty great, though I wish her stand had a hole so I could put it on the stands I got. Feels tiny bit flimsy otherwise, with those huge ass wings.

    -Rodan is pretty cool, I don't have a LOT to say about him, though his wing joints are the tightest. Also I wish he was able to posed in walking mode, but ah well. Comes with an alternate, closed-mouth head instead of an articulated mouth, probably due to size issues. Also I could not get that display rod to stand straight, for the life of me.

    -Godzilla, surprisingly, had no joint issues, they were all able to be bent pretty easily out of the package. I was surprised. You can do some stupid stuff with the articulation, but he kinda only has the one viable pose unless you want to use a stand. I wish his tail curled more given how many joints it has. Also the mouth doesn't look that stupid in person, I swear!

    Overall, Godzill and Rodan are pretty good. Had Mothra been a like $15 instead of $22, she's be great too, but as in she's a lot of money for not a lot of plastic, especially compared to Godzilla's bulk, or that bigass base that Rodan comes with.

    Sad Ghidorah is apparently just too big to justify making. Curious if they'll ever get to the US-made titans. I'd love a toy of that spider squid.

    Also, give me a Gigan, you cowards!

  • Local H JayLocal H Jay Registered User regular
  • WingedWeaselWingedWeasel Registered User regular
    I only just recently saw this model for master chief. Has the visor always been like that?

  • Local H JayLocal H Jay Registered User regular
    I only just recently saw this model for master chief. Has the visor always been like that?

    This is based off the Halo CE design, with this particular design being tweaked by mech designer Izmojuki

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    I just got this in today, so had to transform it to make sure it isn't broken and free of defects. It is really awesome and I have to say worth the money. The amount of folding, twisting, turning, etc. is insane! It is not even close to any previous Masterpiece I own. I'm going to take more pictures later to share, but wanted to post this now.

    MP-44.jpg

    oosik_betsuni.png
    Steam: betsuni7
  • HeatwaveHeatwave Come, now, and walk the path of explosions with me!Registered User regular
    Awesome!

    I have mine waiting at the post office. Need to remember to pick it up Saturday morning before I drop the car off for service

    P2n5r3l.jpg
    Steam / Origin & Wii U: Heatwave111 / FC: 4227-1965-3206 / Battle.net: Heatwave#11356
  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    Heatwave wrote: »
    Awesome!

    I have mine waiting at the post office. Need to remember to pick it up Saturday morning before I drop the car off for service

    Heck yeah you do! What sucks are reading the comments of people having defective and broken ones. =(

    oosik_betsuni.png
    Steam: betsuni7
  • DelduwathDelduwath Registered User regular
    Wow, that looks good! Hefty price tag, but I'm guessing that watching some transformation videos (aka porn) will push me over the line to buying it.

  • DelduwathDelduwath Registered User regular
    Update: I have watched a transformation video and wow that thing is incredibly. I can see the engineering the money went to.

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    Yeah it is really crazy. This was the first Masterpiece that I had to watch a video to figure out how to transform him. The instructions were somewhat vague in spots that confused me. I'm honestly afraid of transforming him back now since there are so many things that could go wrong. Plus forgetting a fold here or there.

    That said, it really is awesome to handle it in person since it looks like an action figure in robot form. Apparently it has a ton of flexibility to allow him to be posed in a bunch of positions.

    oosik_betsuni.png
    Steam: betsuni7
  • Undead ScottsmanUndead Scottsman Registered User regular
    I just found out Ectotron is roughly MP scale, so I guess he gets to go live on that shelf. :)

  • DelduwathDelduwath Registered User regular
    Betsuni wrote: »
    Yeah it is really crazy. This was the first Masterpiece that I had to watch a video to figure out how to transform him. The instructions were somewhat vague in spots that confused me. I'm honestly afraid of transforming him back now since there are so many things that could go wrong. Plus forgetting a fold here or there.

    That said, it really is awesome to handle it in person since it looks like an action figure in robot form. Apparently it has a ton of flexibility to allow him to be posed in a bunch of positions.
    Yeah, there were so many tiny pieces moving on tiny joints. I think I'd never want to transform this without following step-by-step instructions. It also makes me wonder what the longevity of something like this is. How will the plastic hold up over time? How will the little metal rods in the joints hold up? Certainly a model that sits on the shelf forever would have a very different lifespan from one that gets handled and posed all the time, but still - we live in an fallible physical world where entropy is the only law.

    This nihilistic post is brought to you by boxes of ruined childhood toys that I had to throw out while packing for a move last week. I had to throw out so many favorite toys from the 90s that my heart ached. Literally everything that had that rubbery soft plastic could just immediately go in the trash can, because by this point it was sticky at best, soft at worst; the skirt on my Ronin Warriors Ryo actually had beads of some liquid on it that I was too afraid to investigate in any detail. This was in a box surrounded by other toys (which didn't have the liquid on them), so I have to assume the plastic broke down enough that stuff started seeping out of it.

    All the Transmetal 2 Beast Wars toys had chrome that was flaking to a greater or lesser extent. The Transmetal 1 toys were mostly fine, strangely, but poor Rattrap, one of my all-time favorites, couldn't be saved.

    Every one of my TMNT Mutations toys (the transforming ones: Mutations, Road Ready Mutations, Mighty Mutations) either had sticky rubbery plastic, hard plastic that felt greasy, or both. I loved those so much.

    To be fair, I didn't exactly take the best care of them in the last ~10 years; they pretty much just sat in cardboard boxes that weren't in climate-controlled rooms, and NYC summers can get pretty hot and humid. I don't really know how much I could have done to preserve them for longer, short of expensive climate-control. My guess is that inexpensive children's toys aren't really engineered to last for 20 years, but I keep wondering if it's my fault that those things got so degraded.

    How do you folks store your little plastic dollies? Do you take any special care to shield them from the elements, or do you just accept that one day they will have to be tossed?

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    To be honest I think this guy will actually stand up to being transformed and posed a lot. Nothing compared to the mainline toys of course, but it should hold up. The plastic feels the same as my other Tomy Takara and Hasbro Masterpieces.

    I currently have all of my old Star Wars figures, Transformers, Machine Robos all bagged in sandwich baggies so they don't touch each other and in boxes in a bedroom closet that doesn't get that hot. I haven't looked at them in about 8 years or so but I'm guessing they are still safe. The rest of my childhood toys are still at my parents' house so no idea if they have degraded. I do know that my poor GameCube controller is going gummy along with my old PS1 controllers. Which is hilarious to me since my old Atari 2600 controllers are fine.

    oosik_betsuni.png
    Steam: betsuni7
  • Forever ZefiroForever Zefiro cloaked in the midnight glory of an event horizonRegistered User regular
    The liquid on your old toys is most likely plasticizer

    2fbg9lin3kdl.jpg
    XBL - Foreverender | 3DS FC - 1418 6696 1012 | Steam ID | LoL
  • DelduwathDelduwath Registered User regular
    The liquid on your old toys is most likely plasticizer
    That makes sense. Also, I'm glad I didn't touch it except by accident.

    My melting toys reminded me of this Twitter thread (spoilered for length of 7 tweets):
    I'm not saying that action figures are a vector for a distributed Lovecraftian horror, but.

  • Undead ScottsmanUndead Scottsman Registered User regular
    Technically the majority of oil is from plant matter.

    *pushes glasses up*

  • Local H JayLocal H Jay Registered User regular
    The liquid on your old toys is most likely plasticizer

    On yours, maybe.

  • DelduwathDelduwath Registered User regular
    Fair enough - but a creeping growth, mindless and omnipresent, without intent but with direction, consuming the very sunlight to live, sounds even more Lovecraftian to me.

  • NobodyNobody Registered User regular
    Hmm, get the Rainmaker set today, or POTP Predaking next weekend.

    Decisions, decisions

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    Nobody wrote: »
    Hmm, get the Rainmaker set today, or POTP Predaking next weekend.

    Decisions, decisions

    I have the Predaking. It is neat, but man is it huge.

    oosik_betsuni.png
    Steam: betsuni7
  • Undead ScottsmanUndead Scottsman Registered User regular
    POTP Predaking will become harder to aquire, faster.

    Though Omega Supreme is out soon.

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    POTP Predaking will become harder to aquire, faster.

    Though Omega Supreme is out soon.

    Won't they both be hard since the Rainmakers set is a Target exclusive?

    oosik_betsuni.png
    Steam: betsuni7
  • Undead ScottsmanUndead Scottsman Registered User regular
    Betsuni wrote: »
    POTP Predaking will become harder to aquire, faster.

    Though Omega Supreme is out soon.

    Won't they both be hard since the Rainmakers set is a Target exclusive?

    Predaking is older and will likely be harder to aquire in the future.

  • NobodyNobody Registered User regular
    Gonna go with the Predaking. My desire for the Rainmakers has to do with wanting to collect the full seeker set, and until I can source Red Wing (without shady shit or opening credit cards) I can pass.

  • DonnictonDonnicton Registered User regular
    Delduwath wrote: »
    The liquid on your old toys is most likely plasticizer
    That makes sense. Also, I'm glad I didn't touch it except by accident.

    My melting toys reminded me of this Twitter thread (spoilered for length of 7 tweets):
    I'm not saying that action figures are a vector for a distributed Lovecraftian horror, but.

    How to take a George Carlin skit and make it eye-rollingly Millennial in a mere 7 tweets

  • DelduwathDelduwath Registered User regular
    I admit that out of all possible reactions to those tweets, "this is millennial nonsense" was not one I could have ever predicted.

  • WingedWeaselWingedWeasel Registered User regular
    Delduwath wrote: »
    I admit that out of all possible reactions to those tweets, "this is millennial nonsense" was not one I could have ever predicted.

    It never crossed my mind either. However in hindsight literally everything else has millennials attached to it, why not this?

  • Forever ZefiroForever Zefiro cloaked in the midnight glory of an event horizonRegistered User regular
    Omega Supreme is in my pile of loot... To ship now or wait for other stuff to come in...

    2fbg9lin3kdl.jpg
    XBL - Foreverender | 3DS FC - 1418 6696 1012 | Steam ID | LoL
  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    Omega Supreme is in my pile of loot... To ship now or wait for other stuff to come in...

    I luckily decided to hold off on picking up Omega Supreme for now. Which is a good thing since it seems that I have non-stop toys showing up at my house lately.

    oosik_betsuni.png
    Steam: betsuni7
  • WingedWeaselWingedWeasel Registered User regular
    Betsuni wrote: »
    Omega Supreme is in my pile of loot... To ship now or wait for other stuff to come in...

    I luckily decided to hold off on picking up Omega Supreme for now. Which is a good thing since it seems that I have non-stop toys showing up at my house lately.

    That doesn't sound like a bad thing

  • DelduwathDelduwath Registered User regular
    I watched a video review of Omega Supreme, and wow is he a big boy. The rocket part was maybe 3/4 the length of the reviewer's arm.

    Omega Supreme is one of those toys that I've always dreamed about, but getting the original was basically never a possibility. This model looks like a really awesome modern version, but I absolutely do not have the space for him.

  • BetsuniBetsuni UM-R60L Talisker IVRegistered User regular
    I currently have Fortress Maximus, Predaking and Trypticon standing on the floor in front of my shelving where all of my Transformers and Star Wars stuff is on display. They are all just too tall to display on a shelf. Luckily I have Devastator on the top shelf with my Masterpieces since he sort of fits with their scale. I'm planning on Omega Supreme joining the floor crew as soon as I pick one up.

    oosik_betsuni.png
    Steam: betsuni7
  • Forever ZefiroForever Zefiro cloaked in the midnight glory of an event horizonRegistered User regular
    Omega Supreme is in my pile of loot... To ship now or wait for other stuff to come in...

    I say this as Metroxplex still remains boxed up

    What am I doing with my life

    2fbg9lin3kdl.jpg
    XBL - Foreverender | 3DS FC - 1418 6696 1012 | Steam ID | LoL
  • DelduwathDelduwath Registered User regular
    Buying toys.

This discussion has been closed.