I found a neat looking thing that was available as a live wallpaper for Android, so I decided I wanted it on my phone's lock screen. Except it turns out you can only put live wallpapers on the lock screen of a Huawei phone if it comes from Huawei's theme gallery.
Meanwhile I can put this thing on the lock screen of my older Asus tablet just fine.
Hey tech thread, yesterday I was getting a swipe card printed to give me access to a new building, and the lady working the card printer took three tries to get the badge to come out properly. On the first two attempts, the photo and text on the card were coming out with misaligned colours, kind of like this:
Funny thing was, even though the quantity of inks coming out was okay, the printer was giving a low-ink error, and sure enough when the printer lady changed the cartridge all the colours lined up again. Could anyone who knows about printers hazard a guess as to why a new ink cartridge would fix an alignment problem? I'm afraid I didn't take note of the model of the machine.
Hey tech thread, yesterday I was getting a swipe card printed to give me access to a new building, and the lady working the card printer took three tries to get the badge to come out properly. On the first two attempts, the photo and text on the card were coming out with misaligned colours, kind of like this:
Funny thing was, even though the quantity of inks coming out was okay, the printer was giving a low-ink error, and sure enough when the printer lady changed the cartridge all the colours lined up again. Could anyone who knows about printers hazard a guess as to why a new ink cartridge would fix an alignment problem? I'm afraid I didn't take note of the model of the machine.
Well it's a printer so the answer is probably "Because fuck you."
it depends heavily upon the type of printer, but lets go ahead and assume it's a cheap printer...
the method by which ink is dispensed out of an ink cartridge in an inkjet printer can be rightfully described as "stupid steampunk bullshit, how did this even work, what the fuck?"
some inkjets (maybe all?) dispense ink by creating a pulse of heat that pressurizes the ink and forces it out of the nozzle. if the ink volume is low, then the pressure generated may not be adequate to force the ink out in time, causing misalignment
its honestly unbelievable to me that this fucked up shitty design was able to print out my dank goku jpegs with such precision back in the day
I will say that the cartridge was absurdly large. I've noticed that some printers, like the one I have at home, the cartridge is just the ink + a minimum of hardware needed to store and dispense it, whereas with others the cartridge seems to be half the inner workings of the machine.
0
Options
BroloBroseidonLord of the BroceanRegistered Userregular
to be fair to Giggle, reserving the right to collect and distribute your photos is something literally every social media site has to put in their terms of service in order to just host your pictures on their servers
I mean, everything else about it sounds really dumb, but that's pretty boilerplate
(CNN)It may sound like a gruesome detail from a dystopian movie, but a team of scientists believe yarn grown from human skin could soon be used to stitch up surgical patients and repair organs.
The researchers say their "human textile," which they developed from skin cells, can be used for knitting, sewing and even crochet, and can aid a number of medical procedures.
The string-like substance would have the ability to "truly integrate into the host's body," the team from the University of Bordeaux in France said.
"This novel strategy holds the promise of a next generation of medical textiles that will be mechanically strong without any foreign scaffolding," they wrote in their study, which was published in the journal Acta Biomaterialia.
My desktop speakers' DAC, an Audioengine D1, has started playing up and is no longer working via usb to the PC. Thankfully it also has optical in, so I've hooked that up for now.
I was considering looking into getting a replacement, but is there any real difference in the quality of audio I'm going to be getting with optical, compared to usb? My headphones and speakers are decent, but definitely not audiophile level.
The D1 has worked great for almost 7 years, and if I'm good just sticking with the optical setup, then I'd rather do so and put off forking out another $200 as long as possible.
I also have a little Soundblaster Play 3, which I use primarily to clean up my mic audio when I'm using my headset. Since it's also a DAC, I tested out my headphones on it and after doing a few audio tests, I found I was actually able to hear a wider range of sound frequencies through it, compared to the D1, especially in the lower end.
I figured the D1 would be more likely to give me a better quality sound, but it almost seemed like the Play 3 was feeding me a more... raw sound?
Is this normal, or have I possibly failed to do something with my D1 to set it up properly?
As far as I'm aware the D1 isn't particularly great, especially not for the price when the Schiit Modi is right there.
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
As far as I'm aware the D1 isn't particularly great, especially not for the price when the Schiit Modi is right there.
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
Yeah I haven't really ever had any issues with a noisy USB bus and as far as I can tell the audio sounds exactly the same over optical, so that's good, I'll just stick with it.
I suspect the actual issue may be with the USB cable itself, as it's still providing power to the DAC via USB, just no signal.
As far as I'm aware the D1 isn't particularly great, especially not for the price when the Schiit Modi is right there.
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
Yeah I haven't really ever had any issues with a noisy USB bus and as far as I can tell the audio sounds exactly the same over optical, so that's good, I'll just stick with it.
I suspect the actual issue may be with the USB cable itself, as it's still providing power to the DAC via USB, just no signal.
Is it just one usb port? Or a set of them on the same header? Ive had individual ports and headers fail before.
As far as I'm aware the D1 isn't particularly great, especially not for the price when the Schiit Modi is right there.
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
Yeah I haven't really ever had any issues with a noisy USB bus and as far as I can tell the audio sounds exactly the same over optical, so that's good, I'll just stick with it.
I suspect the actual issue may be with the USB cable itself, as it's still providing power to the DAC via USB, just no signal.
Is it just one usb port? Or a set of them on the same header? Ive had individual ports and headers fail before.
The ports all seem to be ok as far as I can see, as I tried all of them and got the same issue with the DAC not working, but other devices work fine.
As far as I'm aware the D1 isn't particularly great, especially not for the price when the Schiit Modi is right there.
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
Yeah I haven't really ever had any issues with a noisy USB bus and as far as I can tell the audio sounds exactly the same over optical, so that's good, I'll just stick with it.
I suspect the actual issue may be with the USB cable itself, as it's still providing power to the DAC via USB, just no signal.
Is it just one usb port? Or a set of them on the same header? Ive had individual ports and headers fail before.
The ports all seem to be ok as far as I can see, as I tried all of them and got the same issue with the DAC not working, but other devices work fine.
If you're handy with a soldering iron you might be able to crack it open and replace the USB port on the DAC, or just stick with the optical.
Posts
Meanwhile I can put this thing on the lock screen of my older Asus tablet just fine.
Sometimes technology is stupid.
f this, let's just bring back Polaroid
Few things in life would make me happier than never having to deal with photos from mobile phones ever again.
Doesn't it get uncomfortable having Number 5 staring at you all the time?
Sarcasm aside fuck our failed meritocracy
Funny thing was, even though the quantity of inks coming out was okay, the printer was giving a low-ink error, and sure enough when the printer lady changed the cartridge all the colours lined up again. Could anyone who knows about printers hazard a guess as to why a new ink cartridge would fix an alignment problem? I'm afraid I didn't take note of the model of the machine.
Well it's a printer so the answer is probably "Because fuck you."
Other than that, I can't think of a valid reason.
the method by which ink is dispensed out of an ink cartridge in an inkjet printer can be rightfully described as "stupid steampunk bullshit, how did this even work, what the fuck?"
some inkjets (maybe all?) dispense ink by creating a pulse of heat that pressurizes the ink and forces it out of the nozzle. if the ink volume is low, then the pressure generated may not be adequate to force the ink out in time, causing misalignment
its honestly unbelievable to me that this fucked up shitty design was able to print out my dank goku jpegs with such precision back in the day
*giggle*
Pics or it didn't happen.
Origin ID: Discgolfer27
Untappd ID: Discgolfer1981
I mean, everything else about it sounds really dumb, but that's pretty boilerplate
Motorola Razr fold test shows it could fail in less than 12 months of use
Tesla just seems like a great example of how profoundly stupid and greedy silicone valley can be.
PSN:Furlion
Doctrine of first sale means I hope these greedy assholes get a large chunk of flesh ripped out in court
Why are you rooting against Lord Musk? Don't you care about saving the earth?
(CNN)It may sound like a gruesome detail from a dystopian movie, but a team of scientists believe yarn grown from human skin could soon be used to stitch up surgical patients and repair organs.
The researchers say their "human textile," which they developed from skin cells, can be used for knitting, sewing and even crochet, and can aid a number of medical procedures.
The string-like substance would have the ability to "truly integrate into the host's body," the team from the University of Bordeaux in France said.
"This novel strategy holds the promise of a next generation of medical textiles that will be mechanically strong without any foreign scaffolding," they wrote in their study, which was published in the journal Acta Biomaterialia.
This will be here until I receive an apology or Weedlordvegeta get any consequences for being a bully
My desktop speakers' DAC, an Audioengine D1, has started playing up and is no longer working via usb to the PC. Thankfully it also has optical in, so I've hooked that up for now.
I was considering looking into getting a replacement, but is there any real difference in the quality of audio I'm going to be getting with optical, compared to usb? My headphones and speakers are decent, but definitely not audiophile level.
The D1 has worked great for almost 7 years, and if I'm good just sticking with the optical setup, then I'd rather do so and put off forking out another $200 as long as possible.
I also have a little Soundblaster Play 3, which I use primarily to clean up my mic audio when I'm using my headset. Since it's also a DAC, I tested out my headphones on it and after doing a few audio tests, I found I was actually able to hear a wider range of sound frequencies through it, compared to the D1, especially in the lower end.
I figured the D1 would be more likely to give me a better quality sound, but it almost seemed like the Play 3 was feeding me a more... raw sound?
Is this normal, or have I possibly failed to do something with my D1 to set it up properly?
Steam ID - VeldrinD | SS Post | Wishlist
I mean, yeah, I know that. But that doesn't really answer either of my questions at all.
Steam ID - VeldrinD | SS Post | Wishlist
Optical vs. USB shouldn't make a difference as long as your USB bus isn't ridiculously noisy. Do you have issues with other USB peripherals suffering from bad signal quality? Does your mouse skip and stutter, does your keyboard fail to register keypresses? They're both digital signals and both are capable of transmitting any kind of digital audio file at maximum resolution with no problem. It really depends on the DAC itself, but the only real logical way to design a DAC with USB and optical input will be to have the optical signal converter in the circuitry BEFORE the digital to analogue conversion takes place so they don't have to have two separate sets of that circuitry.
I don't know anything about setting up a D1 having not used one myself, but unless there's some sort of frequency filter or equaliser settings in play it shouldn't squash any frequencies itself. It may be that the Play 3 has higher output impedance than the D1 on its headphone output circuit which is helping it drive your cans better, resulting in the low frequency boost.
https://youtu.be/gL_KuEu9ABQ
Man the aesthetics of our potential future seems like it will be very....bio organic looking? Not sure if I am using the right term
This will be here until I receive an apology or Weedlordvegeta get any consequences for being a bully
sex-determining facial recognition algorithms, real like phrenology
Yeah I haven't really ever had any issues with a noisy USB bus and as far as I can tell the audio sounds exactly the same over optical, so that's good, I'll just stick with it.
I suspect the actual issue may be with the USB cable itself, as it's still providing power to the DAC via USB, just no signal.
Steam ID - VeldrinD | SS Post | Wishlist
There's no way to disprove it. Have you ever seen a cat penis?
Is it just one usb port? Or a set of them on the same header? Ive had individual ports and headers fail before.
Origin ID: Discgolfer27
Untappd ID: Discgolfer1981
The ports all seem to be ok as far as I can see, as I tried all of them and got the same issue with the DAC not working, but other devices work fine.
Steam ID - VeldrinD | SS Post | Wishlist
If you're handy with a soldering iron you might be able to crack it open and replace the USB port on the DAC, or just stick with the optical.