3cl1ps3I will build a labyrinth to house the cheeseRegistered Userregular
I think it's a journey for everyone who plays this game that you start off trying to do really careful load balancing and exact math and eventually just start making overflow manifolds. It's just so much easier.
+12
Options
Shortytouching the meatIntergalactic Cool CourtRegistered Userregular
the main reason I started doing them is because if you set them up right they make expanding a given line a snap rather than another headache
+6
Options
3cl1ps3I will build a labyrinth to house the cheeseRegistered Userregular
I mostly do them because they look really cool, and allow you to do buildings where each floor has, like, 3 smelters, which then put their output back down the side of the building to come out the front. Then you just add floors and (usually) upgrade the external lifts whenever your mining and / or conveyor tech improves.
Shortytouching the meatIntergalactic Cool CourtRegistered Userregular
play in experimental, live life on the edge
+1
Options
Tynnanseldom correct, never unsureRegistered Userregular
A few tips I like quite a bit: when connecting lifts and splitters and outputs in general, listen for a "chirp" sound - that's the game saying that you're lined up and ready to place something.
You can place lifts directly on inputs and outputs. Doing this on conveyor buses is a way to save a lot of floor space.
Shortytouching the meatIntergalactic Cool CourtRegistered Userregular
snutt kind of implied that an equipment rework is coming before 1.0 in one of the recent Q&As and I hope that comes with some way to equip both blade runners and the jetpack because man
snutt kind of implied that an equipment rework is coming before 1.0 in one of the recent Q&As and I hope that comes with some way to equip both blade runners and the jetpack because man
man
does it suck to have to switch between them
Yeah that sounds rough. And like the dirt of thing I'd bet there are more for already
I don't think they're going to do multiple pieces of mobility gear, but I hope to god they let you wear a piece of mobility gear AND defensive gear at the same time.
Choosing between blade runners and jetpack sucks. Having to abandon using your jetpack to wear a hazmat suit is the absolute worst.
+4
Options
KwoaruConfident SmirkFlawless Golden PecsRegistered Userregular
There's just no good reason you can't wear boots and the jetpack at the same time, even if it was like a final tier unlock
There's just no good reason you can't wear boots and the jetpack at the same time, even if it was like a final tier unlock
Unless the mechanized leggings are to heavy for the Jetpack to work.
Your inventory is stored in a pocket dimension for a reason. :biggrin:
+2
Options
Librarian's ghostLibrarian, Ghostbuster, and TimSporkRegistered Userregular
edited April 2021
The one thing I want is the ability to find things or get things from the awesome shop to customize the Hab living quarters.
Also it would be cool if you could sit down at the terminals in the Hab and use them to see detailed read outs of production and such across the entire map.
... whereas I figured it out almost immediately, as soon as I found out you could slide, because jumping and sliding everywhere is the sort of Morrowind-esque thing I go in for in games, apparently.
Yeah, i unlocked Smart Splitters. Not really an issue anymore:
Factory's making Plates, Screws and Rods on it's three different levels, and then sending those down to make Reinforced Iron Plates, Rotors, and Smart Plating. Managed to get the Casted Screws recipe, which has really simplified things. It's a little choked by the rate Iron's coming in - it needs more, and needs to be making more screws, but until i get T3 Conveyors there's not a lot i can do to make it go faster.
Excess is captured for storage/general usage, and excess beyond that is being sent to Satisfactoryhalla in return for tickets.
Next goals tapping the Pure Cartemium i found and setting up a proper process for that, as well as getting Copper production properly up and automated so i get all the Wire, Cable and Sheeting i need. I smell a new factory incoming!
So having found a nice area that's got 3 pure Iron nodes, a Pure copper node, 2 Pure Limestone, and it's nearbye to a Pure Cartenium and... kinda sorta within reasonable distance of a Pure Coal (Okay, it's a pretty long hike but the other pure coal is worse) I've started building out the basics to what's going to be my new suepr factory to handle Steel, Copper, Iron etc goodness.
Creating these oversized modules in the void. They're stackable and can be tessellated easily, and they've got enough space to help me keep the spaghettis down. Which also should make organization, since i can dedicate each module to a specific task and then chain things together.
Bonus image: The start to Resource Road (It's going to have 2 Pure Lime, 3 Pure Iron and a Pure Copper traveling down it when it's done)
I only use them in big factories though, they're very helpful for long belt runs
2 high subfloors for machines with 2 inputs and 3 high subs for 4 inputs. Production floors are always 4 high, except for the top floor of a big factory which is 6 for a nice epic feel.
Has an update broken in-place upgrading for miners? I'm finally starting to build mk3 miners and it's not letting me upgrade without deleting the existing miner.
I'm sure it worked when I went from mk1 to mk2 ages ago.
Has an update broken in-place upgrading for miners? I'm finally starting to build mk3 miners and it's not letting me upgrade without deleting the existing miner.
I'm sure it worked when I went from mk1 to mk2 ages ago.
you have to have all of the materials in your inventory, so the two autominers you used to make the Mark 2 miner don't count towards 3 autominer cost of making a Mark 3.
So yes you'll need 3 in your inventory to upgrade that, and you'll get two back. It is.. a little dumb.
Has an update broken in-place upgrading for miners? I'm finally starting to build mk3 miners and it's not letting me upgrade without deleting the existing miner.
I'm sure it worked when I went from mk1 to mk2 ages ago.
you have to have all of the materials in your inventory, so the two autominers you used to make the Mark 2 miner don't count towards 3 autominer cost of making a Mark 3.
So yes you'll need 3 in your inventory to upgrade that, and you'll get two back. It is.. a little dumb.
I did in fact have all three portable miners in my inventory, because I remembered not being able to go from mk1 to mk2 without having two miners.
Librarian's ghostLibrarian, Ghostbuster, and TimSporkRegistered Userregular
I wish mods worked on Experimental. I want to play more but I am so exhausted at going through bio power again. I wish I could just start at coal. On the main version I had a little modded bio burner that just gave unlimited power that I’d use until I got coal up and running then turned it off.
I wish mods worked on Experimental. I want to play more but I am so exhausted at going through bio power again. I wish I could just start at coal. On the main version I had a little modded bio burner that just gave unlimited power that I’d use until I got coal up and running then turned it off.
I like bioburners when you're just getting more than the couple in the HAB set up, and I've got my little "feed in wood and leaves, get out biofuel" fab going, and I've got a couple bioburners getting fed.
But, like, once I get past that initial hump, the constant need to refuel is just painful.
I recently did a new save file where I got up to coal power and I don't actually think the refueling is bad, once you have solid biofuel and the chainsaw. A full stuck of 200 solid biofuel lasts 50 minutes.
Obviously fully automated power is much nicer, but I think biomass burners work as an early game thing.
I recently did a new save file where I got up to coal power and I don't actually think the refueling is bad, once you have solid biofuel and the chainsaw. A full stuck of 200 solid biofuel lasts 50 minutes.
Obviously fully automated power is much nicer, but I think biomass burners work as an early game thing.
I also kept the materials for a few of them on me when exploring for hard drives, as some of them require a small amount of power to open.
There's no plan, there's no race to be run
The harder the rain, honey, the sweeter the sun.
Well, the start to the coal power. I got super lucky and got the recipe for Compacted Coal, so now that i have steady power i'm basically going to go and build a compacted coal factory back near one of the coal and sulfur nodes, and then hijack this existing rail to feed compacted coal into everything. And then start working on basic steel production, because i also got the recipe for Solid Steel ingots... Many many things to dooo!
Edit: and the Hijack is complete and Compacted Coal is up and running. That was easy!
Posts
Also if you decide to take some parts feeding into them to use elsewhere it just reduces production rather than completely buggering things.
ED: Related: DAMMIT, UPDATE! Release!!
Steam: Elvenshae // PSN: Elvenshae // WotC: Elvenshae
Wilds of Aladrion: [https://forums.penny-arcade.com/discussion/comment/43159014/#Comment_43159014]Ellandryn[/url]
You can place lifts directly on inputs and outputs. Doing this on conveyor buses is a way to save a lot of floor space.
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891
Fiiiiiiiiiine.
Steam: Elvenshae // PSN: Elvenshae // WotC: Elvenshae
Wilds of Aladrion: [https://forums.penny-arcade.com/discussion/comment/43159014/#Comment_43159014]Ellandryn[/url]
man
does it suck to have to switch between them
Yeah that sounds rough. And like the dirt of thing I'd bet there are more for already
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891
Choosing between blade runners and jetpack sucks. Having to abandon using your jetpack to wear a hazmat suit is the absolute worst.
Unless the mechanized leggings are to heavy for the Jetpack to work.
Your inventory is stored in a pocket dimension for a reason. :biggrin:
Also it would be cool if you could sit down at the terminals in the Hab and use them to see detailed read outs of production and such across the entire map.
Exactly, not a single good reason
Cause if not, get ready to pretty much double your movement speed
I had... hundreds of gameplay hours before i learned about this
Steam: Elvenshae // PSN: Elvenshae // WotC: Elvenshae
Wilds of Aladrion: [https://forums.penny-arcade.com/discussion/comment/43159014/#Comment_43159014]Ellandryn[/url]
Yeah, i unlocked Smart Splitters. Not really an issue anymore:
Factory's making Plates, Screws and Rods on it's three different levels, and then sending those down to make Reinforced Iron Plates, Rotors, and Smart Plating. Managed to get the Casted Screws recipe, which has really simplified things. It's a little choked by the rate Iron's coming in - it needs more, and needs to be making more screws, but until i get T3 Conveyors there's not a lot i can do to make it go faster.
Excess is captured for storage/general usage, and excess beyond that is being sent to Satisfactoryhalla in return for tickets.
Next goals tapping the Pure Cartemium i found and setting up a proper process for that, as well as getting Copper production properly up and automated so i get all the Wire, Cable and Sheeting i need. I smell a new factory incoming!
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891
I do not regret this choice at all
(Also i just hit the ability to do coal power, and with the changes coming, it makes sense to switch over now for the patch)
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891
It's a late-game item, but I think the big game changer in Update 4 is the hoverpack.
Creating these oversized modules in the void. They're stackable and can be tessellated easily, and they've got enough space to help me keep the spaghettis down. Which also should make organization, since i can dedicate each module to a specific task and then chain things together.
Bonus image: The start to Resource Road (It's going to have 2 Pure Lime, 3 Pure Iron and a Pure Copper traveling down it when it's done)
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891
I guess if you put down a floor it was already possible to do this, but the hoverpack helps a lot.
The harder the rain, honey, the sweeter the sun.
I'm setting up compacted coal production for my next turbofuel power plant
I used this method of belting the assemblers and boy howdy was it ever quick and easy, gonna default to this from now on
You know, that makes a lot of sense, but I didn't plan on that when I made my big floor and just randomly thought of this thing.
I only use them in big factories though, they're very helpful for long belt runs
The harder the rain, honey, the sweeter the sun.
2 high subfloors for machines with 2 inputs and 3 high subs for 4 inputs. Production floors are always 4 high, except for the top floor of a big factory which is 6 for a nice epic feel.
Origin ID: Discgolfer27
Untappd ID: Discgolfer1981
I'm sure it worked when I went from mk1 to mk2 ages ago.
you have to have all of the materials in your inventory, so the two autominers you used to make the Mark 2 miner don't count towards 3 autominer cost of making a Mark 3.
So yes you'll need 3 in your inventory to upgrade that, and you'll get two back. It is.. a little dumb.
I did in fact have all three portable miners in my inventory, because I remembered not being able to go from mk1 to mk2 without having two miners.
After making my post I realized I could check the questions website and it turns out some other people have complained about this too in the last two weeks.
I like bioburners when you're just getting more than the couple in the HAB set up, and I've got my little "feed in wood and leaves, get out biofuel" fab going, and I've got a couple bioburners getting fed.
But, like, once I get past that initial hump, the constant need to refuel is just painful.
Steam: Elvenshae // PSN: Elvenshae // WotC: Elvenshae
Wilds of Aladrion: [https://forums.penny-arcade.com/discussion/comment/43159014/#Comment_43159014]Ellandryn[/url]
Obviously fully automated power is much nicer, but I think biomass burners work as an early game thing.
I also kept the materials for a few of them on me when exploring for hard drives, as some of them require a small amount of power to open.
The harder the rain, honey, the sweeter the sun.
Coal power is up and running!
Well, the start to the coal power. I got super lucky and got the recipe for Compacted Coal, so now that i have steady power i'm basically going to go and build a compacted coal factory back near one of the coal and sulfur nodes, and then hijack this existing rail to feed compacted coal into everything. And then start working on basic steel production, because i also got the recipe for Solid Steel ingots... Many many things to dooo!
Edit: and the Hijack is complete and Compacted Coal is up and running. That was easy!
Steam: https://steamcommunity.com/id/TheZombiePenguin
Stream: https://www.twitch.tv/thezombiepenguin/
Switch: 0293 6817 9891