The new forums will be named Coin Return (based on the most recent vote)! You can check on the status and timeline of the transition to the new forums here.
The Guiding Principles and New Rules document is now in effect.
Updated: ATI HD 5970 4GB editions from Asus, Sapphire, & XFX
Normal 5970s can be run in a quad crossfire, so you can run two & only two 5970s together in a crossfire.
This looks like it has a crossfire connection here. The real question is the crossfire bridge since these actually take up 3 slots instead of the usual 2.
I'm not sure if that is fudzilla article is saying it already has scored 22K in Vantage, or is spec'd so that it definitely will. Either way, that card is gonna be $800 and probably require that much wattage as well. I benched my 5870 at around 16500 or so 3d marks in vantage. I'm also wondering if it's worth OC'ing.
As far as crossfire goes don't these dual-GPU cards usually not scale very well on that?
Ahahahaha! The XFX looks like an actual honest to goodness photoshop.
victor_c26 on
It's been so long since I've posted here, I've removed my signature since most of what I had here were broken links. Shows over, you can carry on to the next post.
I'm not sure if that is fudzilla article is saying it already has scored 22K in Vantage, or is spec'd so that it definitely will. Either way, that card is gonna be $800 and probably require that much wattage as well. I benched my 5870 at around 16500 or so 3d marks in vantage. I'm also wondering if it's worth OC'ing.
As far as crossfire goes don't these dual-GPU cards usually not scale very well on that?
From what I've read the Ares ROG will use 450 watts with three power connections, 8,8 & 6 pin. While the Sapphire only uses two 8 pin connections.
Also, ATI has updated the drivers/CCC so these cards should now crossfire fine. It also appears that the only item Sapphire is using from ATI is the GPU it's self. The board and the rest are all their own design & parts. I can only assume the same for Asus.
Finally, GPUs you have to design your own motherboard and case to use.
I had to use boltcutters on my drive bay when I installed my 4870x2 :x
I know more than a few people who have had to Dremel parts out of their cases. I was lucky on the last build I did where the video card was able to fit into the drive cage without needing anything removed.
My current build, I just ordered a Haf 932 so I would have the room. I really want the Ares ROG but I'll go with which ever is cheaper between Asus & Sapphire.
I always wondered if the removable drive bay in my Antec P180 was ever going to require outright removal.
The way cards have been growing the past couple years, I guess that time may be coming sooner than I thought Already shoved a 120mm fan behind it, so it'd just give me more cabling space I guess.
flammiebc on
Switch: SW-7753-7176-1119
PSN: LucidStar_BC
0
Zxerolfor the smaller pieces, my shovel wouldn't doso i took off my boot and used my shoeRegistered Userregular
edited March 2010
I had to remove the drive bay on my P180 when I bought my 8800GTX three years ago. I actually had to take a measuring tape to the store's demo cases to make sure that it would fit.
xbox heug video cards aren't a particularly novel thing, less you forget the majesty that was the Voodoo 5 6000 of legend.
Does this come with an engine hoist in order to get it into your system?
Myself & others I've chatted with are hoping for some kind of bracket system. All that weight on one PCI-x16 slot will not be good for the mobo. Personally I'll run zip ties from the card to the top of my case if I have to.
Posts
Fixed it for you.
It would also have to be with a dual-processor motherboard and some sort of horrific RAID array containing dozens of drives.
EDIT: Presumably quad crossfire would actually be octa crossfire. Worrying.
Battle.net
Normal 5970s can be run in a quad crossfire, so you can run two & only two 5970s together in a crossfire.
This looks like it has a crossfire connection here. The real question is the crossfire bridge since these actually take up 3 slots instead of the usual 2.
As far as crossfire goes don't these dual-GPU cards usually not scale very well on that?
PSN: TheScrublet
From what I've read the Ares ROG will use 450 watts with three power connections, 8,8 & 6 pin. While the Sapphire only uses two 8 pin connections.
Also, ATI has updated the drivers/CCC so these cards should now crossfire fine. It also appears that the only item Sapphire is using from ATI is the GPU it's self. The board and the rest are all their own design & parts. I can only assume the same for Asus.
I had to use boltcutters on my drive bay when I installed my 4870x2 :x
I know more than a few people who have had to Dremel parts out of their cases. I was lucky on the last build I did where the video card was able to fit into the drive cage without needing anything removed.
My current build, I just ordered a Haf 932 so I would have the room. I really want the Ares ROG but I'll go with which ever is cheaper between Asus & Sapphire.
The way cards have been growing the past couple years, I guess that time may be coming sooner than I thought Already shoved a 120mm fan behind it, so it'd just give me more cabling space I guess.
PSN: LucidStar_BC
xbox heug video cards aren't a particularly novel thing, less you forget the majesty that was the Voodoo 5 6000 of legend.
Anyone trying to use 6 monitor eye-finity.
Sapphire is also releasing a 2gb 5870 with 6 mini-Display Port ports for eye-finity.
Yea I'm pretty sure that when they run benchmarks on this card the performance improvement will be minimal unless eye-finity is involved.
PSN: TheScrublet
Myself & others I've chatted with are hoping for some kind of bracket system. All that weight on one PCI-x16 slot will not be good for the mobo. Personally I'll run zip ties from the card to the top of my case if I have to.