Penny Arcade Forums› Help / Advice Forum
The new forums will be named Coin Return (based on the most recent vote)! You can check on the status and timeline of the transition to the new forums here.
The Guiding Principles and New Rules document is now in effect.

Figuring out HD Audio

Raijin QuickfootRaijin Quickfoot I'm your Huckleberry YOU'RE NO DAISYRegistered User, ClubPA regular
edited January 2011 in Help / Advice Forum
I just got a new receiver - Denon AVR 391 (Yes, I'm aware of the advantages of the 591, 791, etc... but this was in my budget and did everything I want it to do so I'm happy)

Anyway, I'm using a PS3 slim for blu ray hooked to the receiver via HDMI.

I've been doing some research to make sure I'm getting the best possible audio I can. The Denon has a light when it is decoding TrueHD blu ray audio which I am not getting to light up.

I am however getting a digital PCM audio in 5.1 at 48khz which I think is just as good, if not better, then the TrueHD codec audio but I'm finding it hard to be sure.

Researching online tells me a lot of stuff but I just cannot find a simple, clear cut response and I figure someone here can tell me.

Raijin Quickfoot on

Posts

  • DjeetDjeet Registered User regular
    edited January 2011
    If your receiver supports multi-channel PCM (5.1 PCM sounds like it does) then you are getting HD audio (assuming your PS3 audio is configured correctly). The reason the True-HD or DTS-MA light isn't going on on your receiver is because the PS3 is doing the decoding. All your receiver is doing is amplifying the signal.

    Djeet on
  • Raijin QuickfootRaijin Quickfoot I'm your Huckleberry YOU'RE NO DAISYRegistered User, ClubPA regular
    edited January 2011
    That is what I thought. I was just looking for some reinforcement.

    Raijin Quickfoot on
  • MushroomStickMushroomStick Registered User regular
    edited January 2011
    Did you change the audio settings on your PS3 after you hooked it up to the receiver? Does the Bluray you're playing have a TrueHD audio track?

    MushroomStick on
  • DjeetDjeet Registered User regular
    edited January 2011
    I don't have a PS3 slim to try out myself, but if you want the light on the AVR to go on you could probably set the PS3 to bitstream and have the AVR do the decode.

    Djeet on
  • Raijin QuickfootRaijin Quickfoot I'm your Huckleberry YOU'RE NO DAISYRegistered User, ClubPA regular
    edited January 2011
    MushroomStick wrote: »
    Did you change the audio settings on your PS3 after you hooked it up to the receiver? Does the Bluray you're playing have a TrueHD audio track?

    Yes it has TrueHD.

    I checked the audio settings on the ps3 and it is set to playback a multitude of settings including the TrueHD.

    Raijin Quickfoot on
  • Raijin QuickfootRaijin Quickfoot I'm your Huckleberry YOU'RE NO DAISYRegistered User, ClubPA regular
    edited January 2011
    Djeet wrote: »
    I don't have a PS3 slim to try out myself, but if you want the light on the AVR to go on you could probably set the PS3 to bitstream and have the AVR do the decode.

    I don't care about the light, I just want to be sure I'm getting the best audio I can get.

    Raijin Quickfoot on
  • NailbunnyPDNailbunnyPD Registered User regular
    edited January 2011
    Can you disable PCM and see if the PS3 will use TrueHD instead?

    NailbunnyPD on
    XBL: NailbunnyPD PSN: NailbunnyPD Origin: NailbunnyPD
    NintendoID: Nailbunny 3DS: 3909-8796-4685
    steam_sig-400.png
Sign In or Register to comment.
Penny Arcade Forums› Help / Advice Forum