The new forums will be named Coin Return (based on the most recent vote)! You can check on the status and timeline of the transition to the new forums here.
Please vote in the Forum Structure Poll. Polling will close at 2PM EST on January 21, 2025.
SNES Battery Backed Games
YamiNoSenshiA point called ZIn the complex planeRegistered Userregular
<context>
My girlfriend got me a SNES for Xmas, and I found all my old games. But when I went to play some games, I found my saves were gone. Turns out the battery that backed the saves died.
</context>
I already found a way to replace the battery. Does anyone know of a site that had a list of games that have battery backed saves? Or do they all? Or do I have to test every game independently? Thanks.
YamiNoSenshi on
0
Posts
ZimmydoomAccept no substitutesRegistered Userregular
edited December 2007
I'm pretty sure that any SNES game that has a real save (not password) system is backed by a CR-2032 watch battery.
Just out of curiosity, what method are you using to replace the batteries? Be careful if you're soldering the contacts onto the new battery, because if they get too hot they can explode on you.
Zimmydoom, Zimmydoom
Flew away in a balloon
Had sex with polar bears
While sitting in a reclining chair
Now there are Zim-Bear hybrids
Running around and clawing eyelids
Watch out, a Zim-Bear is about to have sex with yooooooou!
Zimmydoom, Zimmydoom
Flew away in a balloon
Had sex with polar bears
While sitting in a reclining chair
Now there are Zim-Bear hybrids
Running around and clawing eyelids
Watch out, a Zim-Bear is about to have sex with yooooooou!
Zimmydoom, Zimmydoom
Flew away in a balloon
Had sex with polar bears
While sitting in a reclining chair
Now there are Zim-Bear hybrids
Running around and clawing eyelids
Watch out, a Zim-Bear is about to have sex with yooooooou!
It's actually really, really dangerous to be soldering onto a battery. I'd strongly recommend avoiding that.
Yeah, I've had some CR2032s explode on my hands while soldering them. Painful as hell. I recommend just using electrical tape and securing i with multiple strips. Trust me, it's so much more worth it and it will work just as well. If you're adamant about soldering it on, just remember to use proper soldering techniques - heat he rosin THEN apply it to the battery, don't directly heat the battery.
We kind of shy away from the emulator talk around here, just as a heads up.
Also, replaceing a battery means you will have to start over from the beginning. Once your battery dies, or you remove it from it's contacts, the data is gone.
Also RockinX a CR-2032 battery is easy to find at most department stores like WalMart or whatever. You can also get them from any electronics store, or at Radio Shack if you get desparate. Look in the electronics section, CR-2032s are usually in the same place they keep hearing aid batteries.
It's actually really, really dangerous to be soldering onto a battery. I'd strongly recommend avoiding that.
Yeah, I've had some CR2032s explode on my hands while soldering them. Painful as hell. I recommend just using electrical tape and securing i with multiple strips. Trust me, it's so much more worth it and it will work just as well. If you're adamant about soldering it on, just remember to use proper soldering techniques - heat he rosin THEN apply it to the battery, don't directly heat the battery.
I thought I remembered hearing about someone using some kind of superglue and that working well, since you could could just pry the battery out of the old contacts (assuming the spot welds don't force you to mangle them to shit) and glue the new ones in. I know pretty much nothing about what is electroconductive and what isn't, though, so who knows.
Zimmydoom, Zimmydoom
Flew away in a balloon
Had sex with polar bears
While sitting in a reclining chair
Now there are Zim-Bear hybrids
Running around and clawing eyelids
Watch out, a Zim-Bear is about to have sex with yooooooou!
It's actually really, really dangerous to be soldering onto a battery. I'd strongly recommend avoiding that.
Yeah, I've had some CR2032s explode on my hands while soldering them. Painful as hell. I recommend just using electrical tape and securing i with multiple strips. Trust me, it's so much more worth it and it will work just as well. If you're adamant about soldering it on, just remember to use proper soldering techniques - heat he rosin THEN apply it to the battery, don't directly heat the battery.
I thought I remembered hearing about someone using some kind of superglue and that working well, since you could could just pry the battery out of the old contacts (assuming the spot welds don't force you to mangle them to shit) and glue the new ones in. I know pretty much nothing about what is electroconductive and what isn't, though, so who knows.
You wouldn't want to do that because when the new battery dies, taking it out will pull off pieces of the PCB.
TheSonicRetard on
0
ViscountalphaThe pen is mightier than the swordhttp://youtu.be/G_sBOsh-vyIRegistered Userregular
edited December 2007
Maybe they meant hot glue? I've seen plenty of hot glue used with electronics. The stuff usually comes off if you cut at it.
Maybe they meant hot glue? I've seen plenty of hot glue used with electronics. The stuff usually comes off if you cut at it.
Even with hot glue, you risk the battery exploding. You're not really supposed to heat a battery every. Like I said, electrical tape works very well. Just tape it around the PCB several times like you were bandaging a wound, then use a small screw driver or knife to cut notches into the tape where the mounting screws go.
TheSonicRetard on
0
YamiNoSenshiA point called ZIn the complex planeRegistered Userregular
edited December 2007
Thanks everyone for the tips. I'm doing this to some games I know the batteries died on already, as well as a few I never started, so old data isn't a problem. I'll probably just go with the electrical tape method.
Thanks everyone for the tips. I'm doing this to some games I know the batteries died on already, as well as a few I never started, so old data isn't a problem. I'll probably just go with the electrical tape method.
Just so you know, the battery is soldered onto a small metal contact point when you get to it. You can try to pry it off, but honestly, the easiest way to go about it is to have a pair of snipping pliers handy and just snip the contact point as close to the battery as possible. As long as the metal is touching the positive contact on the battery, it'll work. It's not worth pulling the contact point off.
I actually thought it was generally agreed that trying to replace batteries in carts at all is a bad idea, as getting them to fit again is nearly impossible. Or is it just something that needs a surgeon's hands?
I actually thought it was generally agreed that trying to replace batteries in carts at all is a bad idea, as getting them to fit again is nearly impossible. Or is it just something that needs a surgeon's hands?
uh, who agreed to that? It's damn easy to replace batteries - I do it all the time. Most people do, in fact.
I had heard about the cart battery concept since the original Zelda game, because people talked about their saves being erased, but I'm not sure what the discussion here is about.
If the battery dies, your saves are gone, and nothing else you save to the cart will actually be saved? If so, aside from unscrewing anything, is there another way to keep my original games working?
I had heard about the cart battery concept since the original Zelda game, because people talked about their saves being erased, but I'm not sure what the discussion here is about.
If the battery dies, your saves are gone, and nothing else you save to the cart will actually be saved? If so, aside from unscrewing anything, is there another way to keep my original games working?
Posts
Just out of curiosity, what method are you using to replace the batteries? Be careful if you're soldering the contacts onto the new battery, because if they get too hot they can explode on you.
CUZ THERE'S SOMETHING IN THE MIDDLE AND IT'S GIVING ME A RASH
Steam / Bus Blog / Goozex Referral
Sorry, that's correct. I goofed.
Steam / Bus Blog / Goozex Referral
My Pokémon Gold and Silver cartridges' batteries stopped working, are they the same batteries SNES games use?
It's been awhile since I worked on a GBC cart, but I do think they use the same batteries, yes.
Yeah, I've had some CR2032s explode on my hands while soldering them. Painful as hell. I recommend just using electrical tape and securing i with multiple strips. Trust me, it's so much more worth it and it will work just as well. If you're adamant about soldering it on, just remember to use proper soldering techniques - heat he rosin THEN apply it to the battery, don't directly heat the battery.
We kind of shy away from the emulator talk around here, just as a heads up.
Also, replaceing a battery means you will have to start over from the beginning. Once your battery dies, or you remove it from it's contacts, the data is gone.
Also RockinX a CR-2032 battery is easy to find at most department stores like WalMart or whatever. You can also get them from any electronics store, or at Radio Shack if you get desparate. Look in the electronics section, CR-2032s are usually in the same place they keep hearing aid batteries.
Steam / Bus Blog / Goozex Referral
I thought I remembered hearing about someone using some kind of superglue and that working well, since you could could just pry the battery out of the old contacts (assuming the spot welds don't force you to mangle them to shit) and glue the new ones in. I know pretty much nothing about what is electroconductive and what isn't, though, so who knows.
Steam / Bus Blog / Goozex Referral
You wouldn't want to do that because when the new battery dies, taking it out will pull off pieces of the PCB.
Even with hot glue, you risk the battery exploding. You're not really supposed to heat a battery every. Like I said, electrical tape works very well. Just tape it around the PCB several times like you were bandaging a wound, then use a small screw driver or knife to cut notches into the tape where the mounting screws go.
Just so you know, the battery is soldered onto a small metal contact point when you get to it. You can try to pry it off, but honestly, the easiest way to go about it is to have a pair of snipping pliers handy and just snip the contact point as close to the battery as possible. As long as the metal is touching the positive contact on the battery, it'll work. It's not worth pulling the contact point off.
uh, who agreed to that? It's damn easy to replace batteries - I do it all the time. Most people do, in fact.
If the battery dies, your saves are gone, and nothing else you save to the cart will actually be saved? If so, aside from unscrewing anything, is there another way to keep my original games working?
Ka-Chung!
Ka-Chung!
no.