The new forums will be named Coin Return (based on the most recent vote)! You can check on the status and timeline of the transition to the new forums here.
The Guiding Principles and New Rules document is now in effect.
So I'm painting this room I'm moving into and I wanted to paint the door white. So I slapped two coats of primer on it but I can still see the blue (the original color) through the white. Now we ran out of primer, but we have some white ceiling paint. Will that work or is there another kind of white paint I'll need for this?
Generally when painting something of a very different color (i.e. brown over white) you will need at least two coats of the paint. The ceiling paint should be fine though, just might need a couple coats of it.
You need 2 coats of good paint to change a color, in general. To go from dark to light, you need at least two. Primer + paint, though, should reasonably cover it.
My house came w/o doors (only on the bathroom), so we picked up some old wood doors that fit the sizes (each room different, yay), and then spent some time stripping all the old paint off of it. Some lead, some varnish, some latex. Once we had them reasonably clean, we put primer + 2 coats of white semigloss on, and it covered everything up nicely. But yeah, that was only because we'd taken off the colors underneath, and the wood soaked up the primer.
IF you've only used the primer, then yes, that's good -- primer will never cover a color completely. It's to prime the surface for painting, and any color or material underneath will pretty much always show through. You would probably need a dozen coats of primer to get something "primer white." If you've primed it, slap the paint on and call it a day.
Ceiling paint should be fine although it might not be optimal on high contact areas such as where the door touches the frame or places you get a lot of hands and fingers and what not.
Posts
They should say on them which type they are.
My house came w/o doors (only on the bathroom), so we picked up some old wood doors that fit the sizes (each room different, yay), and then spent some time stripping all the old paint off of it. Some lead, some varnish, some latex. Once we had them reasonably clean, we put primer + 2 coats of white semigloss on, and it covered everything up nicely. But yeah, that was only because we'd taken off the colors underneath, and the wood soaked up the primer.
IF you've only used the primer, then yes, that's good -- primer will never cover a color completely. It's to prime the surface for painting, and any color or material underneath will pretty much always show through. You would probably need a dozen coats of primer to get something "primer white." If you've primed it, slap the paint on and call it a day.