Tickets are up for Gundam NT's US theatrical release.
I don't know if any of y'all want to meet up to see it? Here in Los Angeles it appears to be playing in Hollywood and Torrance, if anyone else is in the area I'd be down for meeting at either.
It's on the other side of town here I will think about it
I already bought my ticket for the showing at Century City
Huh, Century City didn't show up for me the first time I checked. That's actually closer to me than Hollywood or Torrance anway.
man I will take a good HG over a MG any day of the week.
I want to say that I disagree with your view, but I fully respect it. It's all about figuring out what you are comfortable with and enjoy. For me, the more complex stuff lets me zone out a bit as I clip, then trim, then assemble.
Man, it's going to be a sweet model when it's assembled!
Problem. I didnt take into consideration claw weight when I places the legs. Crabbo is unfortunatly very forward tippy.
Unfortunalty the legs go into sockets so removing the super glue isnt a option. My only solutions so far are
1: Pull on legs and hope the glue breaks first
2: Drill a hole to attack it to a base
3. Trim the back three legs to make it lean back and hope that it balances nicely
Problem. I didnt take into consideration claw weight when I places the legs. Crabbo is unfortunatly very forward tippy.
Unfortunalty the legs go into sockets so removing the super glue isnt a option. My only solutions so far are
1: Pull on legs and hope the glue breaks first
2: Drill a hole to attack it to a base
3. Trim the back three legs to make it lean back and hope that it balances nicely
Are the legs hollow? Could you try filling them with something to help counterbalance?
It's not a Zoid without an obnoxious amount of weapons attached to it.
Only a little bit obnoxious... the main cannon's coming along, after all! They only upgraded it slightly from the old model...
@Brainleech -- no joke, part of the reason I brought the gunpla markers was so I could do up my Gun Sniper to look closer to that pic... the contrasting colors add a ton to the model.
Problem. I didnt take into consideration claw weight when I places the legs. Crabbo is unfortunatly very forward tippy.
Unfortunalty the legs go into sockets so removing the super glue isnt a option. My only solutions so far are
1: Pull on legs and hope the glue breaks first
2: Drill a hole to attack it to a base
3. Trim the back three legs to make it lean back and hope that it balances nicely
Is the crab or the legs hollow on the kit?
You might be able to drill a hole towards the back end and add some weight to it there to adjust the balance. Maybe a small hole to fill the legs with fishing weights or something?
0
Options
AthenorBattle Hardened OptimistThe Skies of HiigaraRegistered Userregular
See? Great minds think alike!
Could you heat up the super glue to try to break the bond without damaging the resin?
What about adding external weight?
I'm not sure exactly what this crab tank is supposed to look like when it's done, but could you up armor the rear with some additional armor plates without destroying the aesthetic?
What about adding external weight?
I'm not sure exactly what this crab tank is supposed to look like when it's done, but could you up armor the rear with some additional armor plates without destroying the aesthetic?
I assume the kit is resin, so only drill/sand if you're wearing a mask!
I still have not put together both of the Gunsnipers I have because I want to get that look but I know nothing about the gundam markers I think I do but I just don't know
Long ago Testors had paint markers kind of glorified markers in different colours which is what I think they are just in finer points
Gundam paint markers are more intended to touch up certain kits or add some extra detail than for painting an entire kit. You could technically get the same look as in the photo, but all of the weapons come in a dark gunmetal grey and it would be much faster and cleaner to airbrush or brush paint them.
Gundam paint markers are oil based paints, and as oil based paints it means they don't cure. So you can't, for example, put down black to act like a primer then add a color on top, because you'll just end up reactivating the black and making a mess of things. Trust me, I've done so.
my first idea off the top of my head would be to make a base shaped how you want the terrain, paint it with some sort of glue, then sprinkle sand over that liberally until the glue is thickly coated, then let it dry and brush off the excess sand?
0
Options
AthenorBattle Hardened OptimistThe Skies of HiigaraRegistered Userregular
When your weapons platform is:
A) Big as a model on its own.
Big enough to be autonomous
C) be the basis for the concept of "If you strap enough rockets to it, anything can fly"
...
I'm in the home stretch! One more weapon system and then I start on the ammo/energy belts. I figured it would take me a couple more days to finish this guy, but the lack of heavy panel lining, combined with spending so much time watching marathons, means I've blown through him much quicker than I was expecting.
Actual grains of sand aren't the right scale for gundam kits, if that's a concern.
You could put down CA glue, then use baking soda, let it cure, then apply a wash on it, like Seraphim Sepia from Citadel, then drybrush another few earth colors to give it some hue variation.
As a bonus, baking soda makes CA glue cure very quickly.
I would do all this on top of an existing base, or something you want to use as a base.
You can get sand or ballast and glue it to the base.
I used washers or pennies on some of my 40k army to balance them
0
Options
AthenorBattle Hardened OptimistThe Skies of HiigaraRegistered Userregular
edited January 2019
Turns out assembling the belts wasn't as bad as I feared! See spoilers for the process.
Basically, the belts turned out to be nothing more than bead work. I don't know what plastic they used, but I didn't need to do any trimming after clipping them - and I probably would've made myself insane if I did. So instead, I just fastened the wire and went to town.
To start, each belt needed 8 straight pieces and 4 curved pieces. Easy peasy.
After that? 53 straight pieces. I realized that it would be much more sane if I counted them out before I started assembly, as the straights were arranged in 8-long strips on the runner. So I just snipped off all the pieces into a bowl.
A bit of time later, and I was ready to cap them! The caps requested 10mm of slack space in them, at least. I wanted to get this right, even if the slack seemed excessive.
But with that, the belts were ready... and so was the entire model!
I present to you... Zoids EZ-015 Iron Kong, Prozean Knights Version!
(No, we aren't compensating for anything, why do you ask?)
He really towers. Again, 1/72 scale while the Gundam is 1/144 scale, but even if the Gundam was twice as big, the gorilla is still MASSIVE. In fact.. I think, THINK this is the first HMM I've built that is actually heavier than the original Zoid model, with its motors! Batteries would add a bit, naturally, but still.
As you can see, I decided to set him off flipping the world the bird, just to show how articulated he is. But what is he flicking off?
Why.. Optimal Optimus, of course, who has been lurking in the background for a while! There can only be one giant gorilla in this house! ... well.. Two. Technically 3 because I have 2x of both Iron Kong and Optimal Optimus... and I guess that doesn't include Optimus Primal... And.. You know what? Fuck it, you get the idea!
As I try to do, here's the comparison shot between the original and the new one. It really is night and day. Iron Kong was one of the earlier HMMs (as evidenced by the fact that many of the caps are "keyed" and can only go in one way), but the extra PK weapon system brings him in line with my version. The Hasbro Iron Kong included some optional CPs that the original didn't.
Now, there was a LOT of heavy plastic left behind. The original backpack, the extra bits for the cannon... some stuff with the missiles on the back... But that only makes me more excited.
Ahh. I was going to bring this guy to Gundam Club to work on... but given that he's finished, I guess I'll need another kit to work on.
Posts
Huh, Century City didn't show up for me the first time I checked. That's actually closer to me than Hollywood or Torrance anway.
Look at it
Time to start on the fingers, hands, and arms.
man I will take a good HG over a MG any day of the week.
is that... by the Nichijou artist? e: Keiichi Arawi
Hey! HEY! You in the back!
No laying down on the job. Get up and get back to work.
I want to say that I disagree with your view, but I fully respect it. It's all about figuring out what you are comfortable with and enjoy. For me, the more complex stuff lets me zone out a bit as I clip, then trim, then assemble.
Man, it's going to be a sweet model when it's assembled!
*sighs*
FIIIIIIIIIIIINNNNNEEEEEE.....
All of these are amazing.
Also
I am REALLY fighting the urge to flick off the Gundam though.
edit: finally got that sucker in there but I'm afraid if I breath on it wrong it'll pop back out.
I'm fairly certain I would not be so restrained.
It'd just be robot monkey flipping the bird at everything, all day long.
Edit: A brief break from flipping the bird would be taken for a classic "Pull my finger" gag.
But after that? Back to the bird.
He's looking really good. Really suave. Really sophistica---
Wait. What do you mean I'm only 2/3 through the instruction booklet?
... Weapons?
Fuck.
Unfortunalty the legs go into sockets so removing the super glue isnt a option. My only solutions so far are
1: Pull on legs and hope the glue breaks first
2: Drill a hole to attack it to a base
3. Trim the back three legs to make it lean back and hope that it balances nicely
There can only be one!
Are the legs hollow? Could you try filling them with something to help counterbalance?
Only a little bit obnoxious... the main cannon's coming along, after all! They only upgraded it slightly from the old model...
@Brainleech -- no joke, part of the reason I brought the gunpla markers was so I could do up my Gun Sniper to look closer to that pic... the contrasting colors add a ton to the model.
The only way I could add weight was someone adding like, small nuts and bolts into the little gap left into the middle of the kit??
Is the crab or the legs hollow on the kit?
You might be able to drill a hole towards the back end and add some weight to it there to adjust the balance. Maybe a small hole to fill the legs with fishing weights or something?
Could you heat up the super glue to try to break the bond without damaging the resin?
What about adding external weight?
I'm not sure exactly what this crab tank is supposed to look like when it's done, but could you up armor the rear with some additional armor plates without destroying the aesthetic?
Build a base for it with strategically placed rocks or mounds of beach sand.
I assume the kit is resin, so only drill/sand if you're wearing a mask!
Long ago Testors had paint markers kind of glorified markers in different colours which is what I think they are just in finer points
Gundam paint markers are oil based paints, and as oil based paints it means they don't cure. So you can't, for example, put down black to act like a primer then add a color on top, because you'll just end up reactivating the black and making a mess of things. Trust me, I've done so.
A) Big as a model on its own.
Big enough to be autonomous
C) be the basis for the concept of "If you strap enough rockets to it, anything can fly"
...
I'm in the home stretch! One more weapon system and then I start on the ammo/energy belts. I figured it would take me a couple more days to finish this guy, but the lack of heavy panel lining, combined with spending so much time watching marathons, means I've blown through him much quicker than I was expecting.
You could put down CA glue, then use baking soda, let it cure, then apply a wash on it, like Seraphim Sepia from Citadel, then drybrush another few earth colors to give it some hue variation.
As a bonus, baking soda makes CA glue cure very quickly.
I would do all this on top of an existing base, or something you want to use as a base.
I used washers or pennies on some of my 40k army to balance them
To start, each belt needed 8 straight pieces and 4 curved pieces. Easy peasy.
After that? 53 straight pieces. I realized that it would be much more sane if I counted them out before I started assembly, as the straights were arranged in 8-long strips on the runner. So I just snipped off all the pieces into a bowl.
A bit of time later, and I was ready to cap them! The caps requested 10mm of slack space in them, at least. I wanted to get this right, even if the slack seemed excessive.
But with that, the belts were ready... and so was the entire model!
I present to you... Zoids EZ-015 Iron Kong, Prozean Knights Version!
(No, we aren't compensating for anything, why do you ask?)
He really towers. Again, 1/72 scale while the Gundam is 1/144 scale, but even if the Gundam was twice as big, the gorilla is still MASSIVE. In fact.. I think, THINK this is the first HMM I've built that is actually heavier than the original Zoid model, with its motors! Batteries would add a bit, naturally, but still.
As you can see, I decided to set him off flipping the world the bird, just to show how articulated he is. But what is he flicking off?
Why.. Optimal Optimus, of course, who has been lurking in the background for a while! There can only be one giant gorilla in this house! ... well.. Two. Technically 3 because I have 2x of both Iron Kong and Optimal Optimus... and I guess that doesn't include Optimus Primal... And.. You know what? Fuck it, you get the idea!
As I try to do, here's the comparison shot between the original and the new one. It really is night and day. Iron Kong was one of the earlier HMMs (as evidenced by the fact that many of the caps are "keyed" and can only go in one way), but the extra PK weapon system brings him in line with my version. The Hasbro Iron Kong included some optional CPs that the original didn't.
Now, there was a LOT of heavy plastic left behind. The original backpack, the extra bits for the cannon... some stuff with the missiles on the back... But that only makes me more excited.
Ahh. I was going to bring this guy to Gundam Club to work on... but given that he's finished, I guess I'll need another kit to work on.
(haven't looked at the rest of the twitter feed, dunno the normal content)